How To Change The Bulb - Electrolux 16610 Benutzerinformation

When the refrigerator is not in use
In case the appliance will not be used for
a long time follow these steps:
Break the circuit of the appliance.
Remove foods from the refrigerator.
Defrost and clean it as written before.
Leave the door open to avoid a build up
of air inside.

How to change the bulb

1. Break the circuit of the appliance.
2. Unscrew the lamp cover securing
screw.
3. Unhook the moving part by pressing it
as shown in the figure.
4. Replace the bulb with one of the same
power (the maximum power is shown
on the light bulb cover)
5. Fix the lamp cover in place.
6. Screw the lamp cover securing screw.
7. Reconnect the appliance.
8. Open the door and check if the light
comes on.
electrolux 75
GB