Introduction; Proper Use; Features And Equipment; Included Items - Parkside PMFW 280 A2 Bedienungs- Und Sicherheitshinweise

Introduction

The following pictograms are used in these operating instructions / on the device:
Read the operating instructions!
Always heed warning labels and
safety instructions!
Caution - Danger of electric shock!
Hazardous voltage – danger to life!
Explosive material!
V ~
Volt (AC)
W
Watts (effective power)
Multi­Purpose Tool PMFW 280 A2
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. To help you do this please read the accom-
panying operating instructions.

Proper use

Q
The device is intended for sawing, cutting and sand-
ing. The preferred materials on which the device
can be used are: wood, plastic, drywalling, non-fer-
rous metals, fixings (e.g. nails, screws) and wall
tiles. It is particularly suitable for working close to
edges and precise work. Any other use or modifi-
cation to the device shall be considered as improper
use and could give rise to considerable dangers. We
will not accept liability for loss or damage arising
from improper use. Not suitable for commercial use.
36 GB/MT
n
Rated idle running speed
0
Safety class II
Wear hearing protection, dust protec-
tion mask, protective glasses and
protective gloves.
Keep children away from electrical
power tools!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
Dispose packaging and appliance in
an environmentally-friendly way!

Features and equipment

Q
ON / OFF switch
1
Oscillation speed setting wheel
2
Ventilation slots
3
Clamping plate
4
Plunge saw blade (20 mm)
5
Plunge saw blade (32 mm)
6
Backing plate
7
Segment saw blade
8
Scraping knife
9
Clamping screw
10
Allen key
11
Sanding sheet
12
Vacuum dust extraction assembly (3-piece)
13
Housing attachment
13 a
Vacuum dust extraction duct
13 b
Ring connector
13 c

Included items

Q
1 Multi-Purpose Tool PMFW 280 A2
1 Plunge saw blade (20 mm)
1 Plunge saw blade (32 mm)
1 Clamping screw and clamping plate (prefitted)
1 Backing plate