Parts Description; Technical Specifications - Parkside PDBN 6.3 A1 Bedienungs- Und Sicherheitshinweise

Keep these instructions in a safe place.
Ensure you hand over all documentation
when passing the product on to anyone else.
Any use that differs to the intended use as
stated above is prohibited and potentially
dangerous.
Damage or injury caused by misuse or dis-
regarding the above warning is not covered
by the warranty or any liability on the part
of the manufacturer.
This product is not suitable for commercial
use. It is only suitable for domestic use or
similar applications.
z Parts description
1 Air nibbler
2
Switch ON guard
3
Trigger lever
4 Compressed air connection
5 Barbed fitting
6
Exhaust air opening
7
Matrices
8 Stamp
Note: The use of the term "product" or
"device" in the following text refers to
the air nibbler named in these operating
instructions.
z Technical specifications
Product:
Model:
Operating pressure:
Compressed air
connection:
Var. speed
Air consumption:
Cutting capacity:
Cutting width:
Length:
Weight:
Air nibbler
PDBN 6.3 A1
6.3 bar
¼" (6.35 mm)
up to 3500 min
-1
max. 200 l/min
Sheet metal 1.2 mm /
Aluminium 1.6 mm
4.5 mm
195 mm
0.8 kg
Noise emission values
(as per EN ISO 15744): L
Uncertainty K:
Vibration
(as per ISO 28927-7):
Uncertainty K:
Information on noise emission values
It must be noted that the stated noise
emission values are noise emission levels
and thus, do not represent safe workplace
values at the same time. Based on the inter-
action between the emission and immission
levels, the need for additional precautionary
measures cannot be reliably assessed.
Factors that can influence the immission level
present at the workplace include the dura-
tion of effects, characteristics of the working
room, other noise sources, etc.
Furthermore, permissible immission levels
can vary from state to state.
This information should allow the user to
carry out a better assessment of hazards
and risks.
Information on vibration value
The named vibration value can be used to
compare a tool with another.
The actual vibration emission values can
differ depending on the type of application.
To protect the user, the following safety
measures should be observed depending
on the type of application or the conditions
of use.
Service and maintain the device
„
according to these instructions.
Only use accessories that are in perfect
„
condition.
Plan your work steps so that devices that
„
vibrate heavily do not need to be used
during the day.
Introduction
,peak: 104.2 dB
pC
L : 102.6 dB
wA
L : 91.6 dB
pA
3 dB
2.80 m/s
2
0.77 m/s
2
GB 7