Storage When Not In Use - Parkside PEK 2.7 C2 Montage-, Bedienungs- Und Sicherheitshinweise

USB output for data transfer
This product is equipped with USB port 2 (at its side) so that you can
display or save images to a computer:
Turn the product off .
Lift up the cover of the USB port 2 .
Connect the Micro-USB plug of the USB cable 4 to the USB port
2 .
Connect the other end of the USB cable 4 to a computer .
Switch on the computer .
The product turns on automatically when the computer is on .
NOTE: To save power, the display 11 switches off, when the USB
cable 4 is connected to a computer .
Accessories (Fig. B)
The product includes 4 accessories that can be attached to the camera
head 13:
Adaptor
Magnets
Single hook
Double hook
Mirror
Attaching accessories:
– Select the needed accessory .
– Put the accessory onto the camera head 13 .
– Lock the selected accessories' bracket firmly onto the camera
head 13 .
˜ Storage when not in use
Before storage: Remove batteries from the product .
72 GB/MT
Use
6 Retrieving objects (e .g . rings) .
8
9
7 Examining inaccessible areas .