Herunterladen Diese Seite drucken

Viessmann 5066 Bedienungsanleitung Seite 4

Vorschau ausblenden Andere Handbücher für 5066:

Werbung

2.2 Leuchtstoffröhren-Simulator
Art. 5067
Nach dem Einschalten der Leuchten mittels Tastenstellpult
(z. B. Art. 5547) flackern die einzelnen Röhren vorbildge-
recht eine Zeit lang, bis sie nach und nach alle leuchten.
Dabei ist jedes Zündmuster ein wenig anders.
Wenn Sie den Steuerausgang („An/Aus") über einen Ein-
Aus-Schalter (z. B. Art. 5550) dauerhaft mit Masse verbin-
den, wird an Ausgang L5 eine defekte Leuchtstoffröhre
simuliert (siehe Abb. 2). Diese flackert in unregelmäßigen
Abständen kurz auf, wobei diese mal schnell und mal
langsam hell wird.
3. Anschluss
Die Bausteine sind für den Anschluss an 10 – 16 V Gleich-
oder Wechselspannung vorgesehen. Der maxi-male Aus-
gangsstrom von 100 mA pro Ausgang reicht in der Regel
zum Anschluss von 2 bis 3 Glühlampen oder LEDs, denn
die Stromaufnahme einer Viessmann-Leuchte beträgt ma-
ximal 30 mA pro Glühlampe/LED. Wir empfehlen jedoch,
je Ausgang nur eine Leuchte zu betreiben, da sich auch in
der Realität nie 2 Leuchten gleich verhalten.
Der prinzipielle Anschluss ist in Abb. 1 dargestellt und gilt
für beide Artikel.
4. Technische Daten
Betriebsspannung:
Stromaufnahme (ohne Lampen):
Ausgänge 1 – 5:
Max. Strom pro Ausgang:
Entsorgen Sie dieses Produkt nicht über den
(unsortierten) Hausmüll, sondern führen Sie
es der Wiederverwertung zu.
Änderungen vorbehalten. Keine Haftung für Druckfehler
und Irrtümer.
Die aktuelle Version der Anleitung finden Sie auf der Viess-
mann Homepage unter der Artikelnummer.
Modellbauartikel, kein Spielzeug! Nicht geeignet für Kinder
DE
unter 14 Jahren! Anleitung aufbewahren!
Model building item, not a toy! Not suitable for children
EN
under the age of 14 years! Keep these instructions!
Ce n'est pas un jouet. Ne convient pas aux enfants de
FR
moins de 14 ans ! C'est un produit décor! Conservez cette
notice d'instructions!
Não é um brinquedo!Não aconselhável para menores de
PT
14 anos. Conservar a embalagem.
4
10 – 16 Volt AC~/DC=
ca. 20 mA
Viessmann
Modelltechnik GmbH
Bahnhofstraße 2a
D - 35116 Hatzfeld-Reddighausen
info@viessmann-modell.com
www.viessmann-modell.de
2.2 Fluorescent lamp-simulator
item 5067
If the input "An/Aus" is given a short electric contact
(e. g. with the push button panel item 5547), the
different fluorescent tubes flicker for a moment before all
of them shine one after the other. The turning on pattern is
a little different for each of the tubes.
By using an universal on-off switch (e. g. item 5550) the
input ("An/Aus") is switched to earth permanently and a
defective tube is simulated on output L5 (fig. 2). This tube
flickers at irregular intervals, at times brightening quickly,
at times slowly.
3. Connection
The modules are designed for connection to 10 – 16 Volt
direct (DC) or alternating (AC) voltage. The maximum
current of 100 mA per output is normally sufficient for the
connection of 2 or 3 bulbs or LEDs. The current consump-
tion of a Viessmann lamp is up to 30 mA for each bulb/
LED. We recommend connection of only one lamp to each
output, since no two lamps will ever behave exactly the
same way in reality.
The connection in principle for both modules is shown in
fig. 1.
4. Technical data
Operating voltage:
Current consumption (without bulbs):
Outputs 1 – 5:
100 mA
Max. current loading:
Do not dispose of this product through (unsorted)
domestic waste, supply it to recycling instead.
Subject to change without prior notice. No liability for
mistakes and printing errors.
You will find the latest version of the manual on the Viess-
mann website using the item number.
Modelbouwartikel, geen speelgoed! Niet geschikt voor
NL
kinderen onder 14 jaar! Gebruiksaanwijzing bewaren!
Articolo di modellismo, non è un giocattolo! Non adatto
IT
a bambini al di sotto dei 14 anni! Conservare instruzioni
per l'uso!
Artículo para modelismo ¡No es un juguete! No
ES
recomendado para menores de 14 años! Conserva las
instrucciones de servicio!
10 – 16 V AC~/DC=
ca. 20 mA
Stand 06/sw
Made in Europe
100 mA
92135
09/2019
Ho/Kf

Werbung

loading

Diese Anleitung auch für:

5067