Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fig. 1
Thank you for having chosen a quality product of Bitron Home, an Urmet Group brand. Bitron Home
products have been specifically designed for use with the QIVICON platform for which they are approved.
QIVICON enables you to manage and control you smart phone in a really easy way: applications for PC,
tablet and smartphone let you manage all connected devise, at any time and from anywhere.
OPERATION
This smart plug allows you to switch on and off electrical devices and to measure their consumption. The
maximum load is 16A (3,860W at 230V). In compliance with European standards and for your safety, a
protection inside the device will release if you significantly exceed the maximum load. The device will not
work anymore.
If the smart plug is on, the function key lights up red. You can switch the plug on and off by pressing the
function key (Fig. 3) or through the QIVICON platform.
This smart plug operates as a ZigBee radio signal repeater. This means that any ZigBee devices registered
at your home automation system can communicate with the home base / gateway through one or more
smart plugs. This allows you to increase the radio coverage of your residential ZigBee radio network in an
almost unlimited way. This automatically enabled function is independent from the switch status of the start
plug.
SET-UP
This step requires that you have a QIVICON Home Base equipped with a QIVICON ZigBee radio dongle.
1.
Insert the smart plug into a power socket in order to supply it with energy (fig. 1).
2.
Follow for the addition of new devices of the installation wizard, which can be found in the app or in
the web interface of your QIVICON system. For further information on the registration process, please
consult http://support.bitronhome.eu.
If you wish to associate the device to a different home base, it is sufficient to repeat the procedure of your
system for the addition of new devices. Once successfully concluded the installation process, the sensor
will not communicate with the system, to which it has been previously registered, anymore.
3
Fig. 2
Fig. 3
DS902010-005B
Werbung
