Asus Republic of Gamers ROG Strix series Schnellstartanleitung Seite 4

Installing your ROG STRIX Power Supply Unit
Before installing or removing cables, ensure that the system is turned off, and
all power cables for the system and all attached devices are unplugged.
1. Follow the directions of your chassis manual and secure your ROG STRIX power supply unit
into your chassis using the mounting screws.
2. Connect the bundled cables to your ROG STRIX power supply unit.
3. Connect the power connectors to your motherboard and peripheral devices according
to your preference. You may refer to the list below to check which devices each power
connector can be connected to.
•
•
C onnect the 24-pin or 20-pin Main Power Connector to the motherboard's 24-pin or
•
20-pin power connector.
C onnect the 4+4 pin CPU +12V Power Connector to the CPU power socket on the
•
motherboard.
C onnect the 4-pin Peripheral Power Connector to peripheral devices if needed.
•
C onnect the 6+2 pin PCI-E +12V Power Connector to the PCI-E graphics card.
•
• C onnect the SATA Power Connector to devices with a Serial ATA interface.
4. Connect your ROG STRIX Power Supply Unit to a power source using the bundled power
cord.
Flip the Power Switch to the "I" position to turn on your power supply unit
5.
4
The power connectors may vary between different models of ROG STRIX
Power Supply Units.
Refer to your motherboard's user manual for more information on the
location and connecting the power connectors mentioned below.
ON
OFF
O dB Fan
ROG STRIX PSU