Mixer Safety Instructions - Parkside PFMR 1600 A1 Bedienungs- Und Sicherheitshinweise

4 . Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained users .
5 . Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools .
6 . Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control .
7 . Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation .
Service
1 . Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained .
10 GB/CY
˜ Mixer safety instructions
1 . Always hold the power tool with
both hands on the intended handles,
take a secure stance and concentrate
on the work. Loss of control can cause
personal injury .
2 . Ensure sufficient ventilation when
mixing flammable materials to avoid
a hazardous atmosphere. Developing
vapour may be inhaled or be ignited by the
sparks the power tool produces .
3 . Do not mix food. Power tools and
their accessories are not designed
for processing food.
4 . Keep the cord away from the
working area. The cord may be
entangled by the stirrer .
5 . Ensure that the mixing container is
placed in a firm and secure position.
A container that is not properly secured may
move unexpectedly .
6 . Ensure that no liquid splashes
against the housing of the power
tool. Liquid that has penetrated the power
tool can cause damage and lead to electric
shock .
7 . Follow the instructions and warnings
for the material to be mixed. Material
to be mixed may be harmful .
8 . If the power tool falls into the
material to be mixed, unplug
the power tool immediately and
have the power tool checked by a
qualified repair person.