Safety Advice For Car Polisher; Original Ancillaries / Accessories; Understood Everything; Operation - Parkside XQ90 Bedienungs- Und Sicherheitshinweise

d) When not in use always ensure that
electrical power tools are kept out of
reach of children. Do not let anyone
use the device if he or she is not famil-
iar with it or has not read the
instructions and advice. Electrical power
tools are dangerous when they are used by
inexperienced people.
e) Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device. Many accidents have their ori-
gins in poorly maintained electrical power tools.
f) Keep cutting tools clean and sharp.
Carefully maintained cutting tools with sharp
cutting edges are less likely to jam and are
easier to control.
g) Use the electrical power tool, accesso-
ries, inserted tools etc. in accordance
with these instructions and
advice, and the stipulations drawn up
for this particular type of device. In
doing this, take into account the
working conditions and the task in
hand. The use of electrical power tools for
purposes other than those intended can lead to
dangerous situations.
Safety advice for
car polisher
Avoiding the danger of injury, fire and
damage to your health:
½
Always pull the plug out of the mains socket
before cleaning or maintaining the device.
½
Ensure that the bonnet is well secured to the
buffing plate.
½
Do not touch any rotating parts!
Before switching on check to ensure that the
buffing plate is not blocked and can start up
without problem.
½
Check to ensure that the bonnet and the buffing
plate are complete and undamaged. Immedi-
General safety advice for electrical power tools / Operation
ately exchange torn or damaged bonnets /
buffing plates.
½
Wait until the polishing disc is flat on the surface
to be polished before switching on the waxer /
polisher.
½
Do not use any abrasives; these can destroy
the paint finish.
©
Original ancillaries /
accessories
½
Use only the ancillaries and accessories that
are detailed in the operating instructions. The
use of parts other than those recommended in
the operating instructions, or other accessories,
can put you at risk of injury.
©

Understood everything?

½
When you have become familiar with these
general safety instruction for electrical appli-
ances, and, with the help of the appropriate
operating instructions, know all about the func-
tions and handling of your electrical appliance,
then you can start working with it. You will
work at your safest only with careful attention
to all of the declarations and instructions of the
manufacturer.
©

Operation

©
Placing the bonnet on the
buffing plate
1. Turn the car polisher over so that the polishing
disc is pointing upwards.
2
2. Place the bonnet
5 6
plate . Ensure that the bonnet
2
centrally and taughtly onto the buffing plate.
over the buffing
is placed
5 6
GB/IE/CY 9