Märklin 49962 Bedienungsanleitung Seite 3

This model offers these features:
• Built-in sound effects circuit for reproducing
different sounds from the prototype. This circuit
controlled by means of the mfx function module.
• A good add-on for locomotives without their own
sound effects module.
• When operated with the Mobile Station and
Central Station: This model registers itself on these
units.  You don't have to enter an address!
• When operated with the Control Unit: An address
from 01 to 80 can be set. Address that has been set
at the factory: 04.
• Functions that can be controlled, when the model
is operated with the Control Unit, Mobile Station or
Central Station:
f1: Sound Effect: Steam Locomotive in Operation
f2: Sound Effect: Locomotive Whistle
f3: Sound Effect: Switching Range Whistle
f4: Sound Effect: Bell (2 x)
• Functions that can be controlled, when the model is
operated with the Mobile Station or Central Station:
f5: Sound Effect: Bell (1 x)
f6: Sound Effect: Bell (3 x)
1) = only when the operating sounds are turned on
f7: Sound Effect: Light generator
f8: Sound Effect: Squealing Brakes off
• Functions that can be controlled, when the model
is operated with the Central Station:
f9: Sound Effect: Banging the doors
f10: Sound Effect: Blowing Off Steam
f11: Sound Effect: Coal Being Shoveled
f12: Sound Effect: Rocker Grate
Notes for operation:
• Control Unit: Locomotive and carriage with
identical address.
• Mobile Station: No locomotive/carriage combination
option. Only f2 to f7 able to be used.
• Central Station: Locomotive/carriage combination
option.
Safety Warnings
• This model is to be used only with an operating-
1)
system designed for it (Märklin Digital or Märklin
Systems).
• This model must never be supplied with power from
more than one transformer.
• Pay close attention to the safety warnings in the
instructions for your operating system.
1)
1)
1)
1)
1)
1)
3