Herunterladen Inhalt Inhalt Diese Seite drucken

Use Extension Bit Holder; Cleaning And Maintenance; Cleaning; Maintenance - Parkside RAPIDFIRE 2.1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für RAPIDFIRE 2.1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Insert a suitable 6-point bit in the bit holder
(
3). Because of the 6-point bit holder, it
may be that you need to rotate the bit slight-
ly. Slide the bit right into the bit holder
3). The bit is held firmly by the duct and
(
the magnetic holder.

Use extension bit holder

Remove the current bit (
holder (
3).
Insert the extension bit holder (
the bit holder (
3). It may be that you need
to rotate the extension bit holder (
slightly because of the 6-point bit holder.
Completely insert the extension bit holder
(
12) into the bit holder (
sion bit holder (
duct and the magnetic holder.
To remove the extension bit holder (
simply remove the extension bit holder from
the bit holder (
3).
Cleaning and

maintenance

Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
2) from the bit
12) into
3). The exten-
12) is held firmly by the
Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
Maintenance
The appliance is maintenance free.

Storage

The device may not be stored in a
12)
damp environment or in places with
corrosive gases; it must be stored in
a dry location outside of the reach of
children.
Keep the surface of the device clean
and only use a dry cloth for cleaning.
The device must not be dismantled. If
12),
the device is damaged, contact the sup-
plier or manufacturer.
Store the battery only in a partially
charged state. The state of charge
should be 40 – 60 % over a longer
storage period.
During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
Store the equipment between 10 °C
and 25 °C. During storage, avoid ex-
treme cold or heat so the battery does
not lose power. In order to keep the
battery well charged, avoid exposing
the appliance to extreme heat or cold
in storage
GB
IE
29

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis