Residual Risks; Assembling Instructions - Parkside PRTA 20-Li A1 Originalbetriebsanleitung

• Never use the machine with
damaged or missing protective
equipment.
• Avoid an abnormal body po-
sture. Ensure secure footing at
all times to maintain balance
when working on slopes.
• Go slowly. Do not walk with the
device in your hand.
• Always wear sturdy shoes and
long trousers during operation
of the machine.
• In the case of an accident
or malfunction during
operation, the device must
be switched off immedia-
tely. Injuries must be pro-
perly treated or medical
assistance sought. Read
the „Trouble shooting" section
to correct any malfunctions or
contact our Service Centre.
MAINTENANCE AND STORAGE
• Remove the removable battery
before carrying out mainte-
nance or cleaning work.
• Use only spare parts and acces-
sories supplied and recommen-
ded by the manufacturer.
• The machine must be checked
regularly and maintained. Have
the machine repaired in a licen-
sed workshop.

Residual risks

Even if properly operating and han-
dling this electric tool, some residual
risks will remain. Due to its construc-
tion and build, this electric tool may
present the following hazards:
a) Cuts
b) Ear damage if working without
ear protection.
c) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
Warning! During operation,
this electric tool generates an
electromagnetic field which,
under certain circumstances,
may impair the functionality
of active or passive medical
implants. To reduce the risk of
serious or lethal injuries, we
recommend that persons with
medical implants consult their
doctor and the manufacturer
of their medical implant be-
fore operating the machine.
Warning! Observe the safety
information in the operating
instructions for your Parkside
X 20 V Team series rechar-
geable battery.

Assembling instructions

Remove the rechargeable bat-
tery from the device before
assembly. Insert the rechar-
geable battery only once the
device is completely assem-
bled. There is a risk of injury!
Mounting the protective cover:
1. Place the protective cover (12)
onto the motor head (10) and
fasten it using the two Phillips
screws (19).
GB MT
59