Additional Safety Instructions - Parkside PRTA 20-Li A1 Originalbetriebsanleitung

GB MT
- after touching a foreign body in
order to check the machine for
damage.
- for an immediate check if the
machine begins to vibrate ex-
cessively.
5) SERVICE
Have your power tool ser-
viced by a qualified repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
Additional safety instruc-
tions
TRAINING
• The appliance is not suitable
for use by children. Children
have to be supervised to ensure
that they do not play with the
appliance. Cleaning and user
maintenance shall not be made
by children.
• This appliance is not intended
for use by persons with reduced
physical, sensory or mental ca-
pabilities, or lack of experience
and knowledge.
• Local regulations or bylaws
may determine the minimum
age for using the device.
• The operator or user is responsi-
ble for accidents or damage to
other persons or their property.
• Children and persons with limi-
ted physical, sensory or mental
capabilities or inadequate
experience and knowledge, or
persons who are not familiar
with the instructions, should
never be allowed to use the
58
machine! Local regulations may
specify an age limit for the user.
• Never let children or persons
who are not familiar with the
instructions mentioned use the
machine.
PREPARATION
• Before each use, carry out a visu-
al inspection on missing or wron-
gly mounted protective devices or
parts of the cutting device.
• Before commissioning and after
any impacts, check for signs of
wear and damages, and have
any necessary repairs performed.
OPERATION
• Wear safety goggles, stable
shoes and long trousers over
the entire period of use of the
machine.
• The use of the machine under
bad weather conditions, espe-
cially in case of lightning risk,
must be avoided.
• Warning! Do not touch any mo-
ving dangerous parts before the
battery has been removed and
the moving dangerous parts
have come to a complete stop.
• Caution, risk of injury from cuts
on hands and feet.
• Stop using the machine when
persons, above all children, and
house pets are in the vicinity.
• Use the machine only in daylight
or with good artificial lighting.
• Always keep your hands and
feet away from the cutting
equipment, above all when you
switch the motor on.
• Never install metallic cutting
elements.