Herunterladen Inhalt Inhalt Diese Seite drucken

Introduction; Intended Use; Features; Technical Data - Parkside PDKS 6.0 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Druckluft-säge
Vorschau ausblenden Andere Handbücher für PDKS 6.0 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 45

Introduction

These original operating instructions / the device uses the following pictograms:
Please read the operating instructions!
Observe the warning and safety
instructions!
Wear ear protection, dust mask, sa-
fety glasses and protective gloves.
Pneumatic saw PDKS 6.0 A1
Introduction
Congratulations!
You have chosen high-quality device by
our company. Familiarise yourself with
the product before using it for the first time. In addi-
tion, please carefully refer to the operating instructions
and the safety advice below. Initial operation of this
tool must be performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!

Intended use

The air saw is an air-powered tool for handyman use.
It is designed for bodywork, automotive and shop
use. The user should wear safety goggles to protect
from fragments and safety gloves to protect from
accidental contact with potentially sharp edges. Keep
these instructions in a safe place. When passing this
product on to others, please also include all the doc-
uments. Any use other than the intended is prohibited
and potentially dangerous. Damages resulting from
noncompliance or misuse are not covered by the
warranty and are not included in the manufacturer's
liability. This device has been designed for house-
hold use and may not be used for commercial or
industrial purposes.
36 GB/MT
110140_par_Druckluft-Saege PDKS 6.0 A1_content_ES_IT_PT.indd 36
Oil daily
Note
Dispose of packaging and device in
an environmentally-friendly way!

Features

Check that all the items are present and that the
product is in perfect condition immediately after
unpacking. Never use the product if it is defective.
Saw blade
1
Socket head wrench 4 mm
2
2 mm socket head wrench for installing /
3
removing the stop bracket
Trigger with safety stop
4
Threaded plug nipple
5
Housing
6
Cover (socket head screw)
7
Stop bracket
8

Technical Data

Max. working pressure:
Max. speed:
Air intake:
Stroke:
Weight:
Noise and vibration
ATTENTION!
Always wear hearing protec-
tion!
Noise parameter per EN15744:2008
Noise level L
:
pA
Sound power level L
:
WA
Uncertainty K = 3 dB
8
6 bar
8500
rpm
¼
10 mm
620 g
80.6 dB(A)
91.6 dB(A)
02.07.15 11:20

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis