Returning To The Factory Settings; Using Soundcap - Yamaha YVC-330 Benutzerhandbuch

YVC-330 User's Manual
3 Press and hold the both volume
buttons (
least 0.5 seconds.
A notification sound rings when the setting is
applied. The microphone indicator goes
back to the previous state, lighting up green
or blue (flashing red if the microphone is
muted).
Returning to the factory
settings
Return the settings of the product to the factory
settings.
1 Press and hold the both volume
buttons (
least 2 seconds.
A notification sound rings, and the
microphone indicator flashes white.
2 Press and hold the on/off-hook button
( ) and the volume - button (
simultaneously for at least 2 seconds.
A notification sound rings. The volume level
indicator lights up green, the illuminated
symbols moving back and forth. The other
indicators turn off.
3 When the volume level indicator turns
off and is in the started-up state, the
product now has the factory settings.
Tip
Returning the product to the factory settings will
clear various settings, such as Bluetooth pairing
information. Reconfigure the settings as
necessary.
32
) simultaneously for at
) simultaneously for at
)

Using SoundCap

By enabling SoundCap, which is comprised of
the "Far Field Noise Reduction (FFNR)", "Self-
Silence", and "Self-Volume Balancer" functions,
you can automatically mute distracting noise
around you and deliver only the sound from the
pick-up range (radius of 1 m) to the remote
party. This also automatically adjusts the
volume of the sound from the speakers based
on the noise around you.
Enable SoundCap if using this product in an
open workspace, and disable SoundCap if
using this product in a conference room.
Note
If enabling SoundCap, install this product within 1 m
(3.3 ft) from all participants.
■ Checking settings of SoundCap
When the microphone is not muted, if the
microphone indicator is lit in blue, then
SoundCap is enabled; if it is lit in green, then
SoundCap is disabled.
■ Enabling or disabling SoundCap
Press the microphone mute button (
volume button ( ) simultaneously.
A notification sound rings and the SoundCap is
enabled or disabled.
(→Page 13)
) and the