Yamaha YVC-330 Benutzerhandbuch Seite 11

YVC-330 User's Manual
■ How the volume level indicator
In addition to the above, the indicator indicates the setting of the product, as described in
"Selecting a connected device on the EXT IN/OUT terminals" (page
occurs, it displays the details of the error.
■ How the microphone indicators
In addition to the above, the indicators flash white in various setting modes.
Also, when an error occurs, they flash red at high speed (at 0.1-second intervals).
10
(Page 9:
Status Description
Normal The input level
operation of incoming
audio signals
from the
remote party is
indicated.
When the The specified
speaker speaker
volume is volume level is
being adjusted indicated.
(→Page 30)
When the The indicator
speaker is indicates that
muted the speaker is
(→Page 30) muted.
When the The indicator
product is indicates that
being started the product is
now starting.
(Page 9: w)
Status
When SoundCap is disabled
(→Page 32)
When SoundCap is enabled
(→Page 32)
When the microphone is muted
(→Page 30)
When incoming Bluetooth
connection requests are received
(→Page 31)
!0
works
)
( ● : On, ○ : Off,
○○○○○
●●●○○
●●●●●
○○○○○
●●●○○
●●●●●
●●○○○
→
○○○●●
(→Page 33)
work
Lit in green.
(They light up brighter when the voice
is input.)
Lit in blue.
(They light up brighter when the voice
is input.)
Flashes red.
Flashes green or blue (red when the
microphone is muted) (at 0.25-second
intervals).
Example
: Flashing)
No audio signal is
present.
Audio signals are
present.
Maximum audio signal
input.
The speaker volume
level is set to minimum.
The speaker volume
level is set to medium.
The speaker volume
level is set to maximum.
The indicator symbols
at the current volume
level will flash.
The illuminated symbols
move back and forth
←
until the product is
completely started.
31). Also, when an error
Description
(→Page 32)
(→Page 33)