Picture Adjustments - Yamaha PDM-1 Bedienungsanleitung

Picture Adjustments

PICTURE
1
Select to adjust each item.
2
Picture
Normalise
Normal
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
White balance
Advanced settings
Press the left or right
select "On". Press the down
enter Advanced Settings mode.
Advanced Settings On
Enables fine picture adjustment at a
professional level (see next page).
Advanced Settings
Normalise
Normal
Black extension
W/B High R
W/B High B
W/B Low R
W/B Low B
Gamma
Advanced Settings Off
Displays images with settings of the
Picture menu.
Helpful Hint (
While the "Picture" menu is displayed, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during "Normalise", then all adjustment values are returned to the factory settings.
24
Press to display the Picture menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture
behind the menu.
Normal
20
0
0
0
0
Normal
On
button to
button to
0
0
0
0
0
2. 2
N /
Normalise
Press the left or right
modes.
Normal
Normal
For viewing in standard (evening lighting)
environments.
This menu selects the normal levels of
Brightness and Contrast.
Dynamic
For viewing in brighter environments.
This menu selects higher than normal levels of
Brightness and Contrast.
Cinema
Ideal for movies.
Note:
If you would like to change the picture and colour of
the selected Picture menu to something else, adjust
using the items in the Picture menu. (see next page)
Press the left or right
modes.
Normal
Normalisation)
Picture
Normalise
Normal
Picture Mode Normal
Contrast 20
0
Brightness
Colour 0
Tint 0
Sharpness 0
White balance Normal
Advanced Settings
button to switch between
Dynamic
Cinema
button to switch between
Cool Warm
On