Attaching The Arm Unit To The Ceiling Mount/Floor Stand Plate - Epson ELPMB60 Installationsanleitung

Installation Procedure

Attaching the Arm Unit to the Ceiling Mount/Floor Stand Plate

a
Insert the arm unit into the gap provided in ceiling mount/floor stand plate B.
Slide it to the front and align the screw holes in ceiling mount/floor stand plate B with the screw holes
in the arm unit.
b
Tighten the screws for ceiling mount/floor stand plate B to temporarily secure the arm unit.
c
Tighten the M4 x 14 mm screws supplied (x4) with a hexagonal wrench (M4 ball point) to
secure the arm unit.
15