Selecting The Picture - Sony PCS-DS150 Bedienungsanleitung

Selecting the Picture

You can select the picture to be sent using the IR video
transmission function or to be displayed on the monitor screen
via the MONITOR OUT jack.
Each time you press the INPUT SELECT button, the picture
changes as follows, and each lamp lights up according to the
selected input:
CAMERA: The camera is selected.
RGB: The equipment connected to the RGB IN connector is
AUX: The equipment connected to the AUX IN jack is
Notes
• If no signal is input from the RGB IN connector or the AUX
IN jack for more than an hour, the unit goes on standby to
save power.
• When selecting RGB for input, the picture quality may
deteriorate as follows:
—When an XGA signal whose frequency is more than 75 Hz
—A band may appear on the screen if the picture is single-
selected. The acceptable signals are VGA, SVGA, and
XGA.
selected.
is input, the resolution becomes lower. Use a 60 Hz signal
if you want to keep the original resolution.
colored or has some gradation.
INPUT SELECT lamps
INPUT SELECT button
53