General Notes On Safety - Parkside PRM 1200 A1 Originalbetriebsanleitung

Symbols in the manual
Wear gloves when handling the
blade.
Pull out the mains plug.

General notes on safety

This equipment may cause
serious injury in the case of
improper use. In order to
avoid injury to people and
damage to property, the fol-
lowing safety information
must be observed and users
must familiarise themselves
with all operating parts.
CAUTION: In this way you
avoid accidents and injuries:
Preparation:
• This device must not be used
by children. Children should be
supervised to ensure that they do
not play with the device. Clean-
ing and maintenance must not be
carried out by children.
This device can be used by indi-
viduals with reduced physical,
sensory or mental abilities or a
lack of experience and knowl-
edge if they are supervised or
have been instructed in the safe
use of the device and understand
the resulting hazards.
• Read the operating instructions
carefully. Familiarise yourself with
the controls and how to use the
machine correctly.
• Do not allow the use of this
equipment by children or others
who are unfamiliar with these
GB
operating instructions. Local
regulations may specify the
minimum age of the operator.
• Do not use the equipment when
people and particularly children
or pets are nearby.
• Children should be supervised
to ensure that they do not play
with the appliance.
• The operator or user is respon-
sible for accidents, injuries to
other people or damage to the
property of others.
• Check the terrain on which the
equipment is to be used and
remove stones, sticks, wires and
other foreign objects that could
become caught and thrown up.
• Wear suitable work clothing
such as stable shoes with non-
slip soles and robust, long trou-
sers. Do not use the equipment
when barefoot or when wear-
ing open sandals.
• Before use, always perform
a visual inspection to check
whether the cutting blades,
fastening bolts and the whole
cutting unit are worn out or
damaged. Do not use the
equipment if protective devices
(e.g. collision guard or grass
bag), parts of the cutting device
or bolts are missing, worn or
damaged. To avoid imbalance,
damaged tools and bolts are to
be replaced only in sets.
• Take care with equipment that
has several cutting tools, as the
movement of one blade may
result in the rotation of the other
blades.
• Use only spare parts and acces-
sories supplied and recommend-
IE NI CY
7