Basic Settings; General; Video; Sound - Blaupunkt 690 series Bedienungsanleitung

Basic settings

Basic settings
In the settings menu, you can adjust the basic settings for
the different functions of the device to your requirements.
In the main menu, press the [ Settings ] button.
The settings menu is displayed, the General
submenu is activated.
Call up the submenus with the buttons in the lower
area of the settings menu.

General

The following settings are possible:
Radio region – Select the reception region for the radio
reception.
FM HICUT - Turn on the function to enhance the signal
of FM.
Blackout – If this value is set, the display of the radio is
completely switched off after 10 or 20 sec. without use.
Dimmer mode – Adjust the display brightness
OFF timer - Set the switch-off time. To protect the vehicle
battery, the device is automatically switched off after the
set time period if the vehicle ignition is switched off.
Beep – Switch confirmation beep on/off
TFT calibration – The touchscreen can be calibrated
here.
Software version – Show the version of software
RGB – Set the backlight color of the buttons.
UI Color – Select the UI color of the main menu.
Load factory settings – Resets all personalised settings.

Video

The following settings are possible:
Set password - Define a password if you want to use the
parental controls.
Rating level - The rating of DVDs can be defined here.
If set to "Adult", all movies can be played back. If a
password was configured, the rating level can be
changed only with the password.
Video out - Switch the rear seat monitor on/off.
Aspect ratio - Adjust the aspect ratio
16

Sound

The following settings are possible:
Subwoofer – Switch subwoofer on/off
Subwoofer filter – Make the setting according to the
subwoofer used (settings: 80/120/160 Hz).
Dynamic sound - Switch dynamic bass on/off.

Time

The following settings are possible:
Date – Set the date
Clock mode – Selection between 12 and 24-h mode
Time – Set the time
Auto clock – Activating/deactivating automatic time
via RDS.

Language

The following settings are possible:
OSD – Language for the user interface of the device.
DVD audio – The audio playback of DVDs is started in the
language defined here.
DVD subtitle – The subtitles of DVDs are shown in the
language defined here.
DVD menu – The DVD menu is displayed in the language
defined here.

Bluetooth

The following settings are possible:
Bluetooth – Bluetooth® can be switched on or off.
Auto connect – If "Auto Connect" is activated, the device
automatically connects with known Bluetooth® devices
as soon as they are in range.
Auto answer – Phone calls from connected telephones
are automatically answered if this option is enabled.
Pairing code – Many Bluetooth® devices request the
pairing code before establishing the connection. You can
define it here.
Microphone – Select the microphone to be used for the
hands-free system via Bluetooth®.

Volume

You can adjust the volume ratio for all audio sources in
the volume menu.