Herunterladen Inhalt Inhalt Diese Seite drucken

Resharpening The Attachment Tools; Maintenance And Cleaning; Disposal; Service Centre - Parkside PEC 200 SE Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 59
Commissioning / Maintenance and cleaning / Disposal / Information
resharpening the
Q
attachment tools
The best work results are only achieved with sharp
attachment tools. You should thus resharpen them
in good time.
WarNING!
rISK OF INjUry! Remove
the plug from the power socket before beginning
to sharpen the tools.
j
Place the attachment tool to be sharpened into
the Electric Scraper (see section on "Changing
attachments").
On a belt sander (e.g. Parkside PEBS 900
see Fig. G):
j
Appropriately fasten the belt sander into / onto
a suitable stationary facility.
j
Pay attention to the running direction of the belt
on the belt sander when resharpening.

Maintenance and cleaning

Q
WarNING!
Before you clean or maintain
the device always pull the mains lead out of the
mains socket.
j
Always keep the device clean, dry and free of
oil or grease.
j
Regularly clean the tool receptor
j
Clean the attachment tools of all remains of
adhesives and other grime.
j
Liquids may not be permitted to permeate into
the appliance.
j
Use a soft, fluff-free cloth to clean the housing.
j
Never use fuel, solvents or aggressive cleansers
that could damage plastic.

Disposal

Q
In accordance with European Directive 2002 / 96 / EC
(covering waste electrical and electronic equipment)
and its transposition into national legislation, worn
out electrical power tools must be collected sepa-
rately and taken for environmentally compatible
recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
Information
Q

Service centre

Q
The service centre for your country is shown in the
warranty documentation.
WarNING!
only by qualified specialist personnel
.
using original manufacturer parts
3
only. This will ensure that your device remains
safe to use.
WarNING!
needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre. This
will ensure that your device remains safe to use.
The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical power
tools with the household rubbish!
Have your device repaired
If the plug or mains lead
GB
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis