Getting Started - Asus GLADIUS Schnellstartanleitung

Getting started

To set up your ROG Gladius Gaming Mouse:
1. Connect the USB cable to your computer's USB port.
2. Connect the micro USB cable to your ROG Gladius Gaming Mouse.
3. Download the driver from http://www.asus.com then install it in your computer.
Replacing the switches
NOTE: Refer to www.asus.com for the list of compatible switches.
If there is a need to replace the switches, follow the steps below:
1. Peel off the four (4) mouse feet under your mouse, then remove the four (4) screws and set
aside.
2. Remove the top cover.
3. Replace the switches with the bundled mouse switches.
Mouse switches
Switch socket
IMPORTANT!
• Ensure to install the switch with its button facing the front of the mouse to the switch socket.
• Ensure that the switches are seated properly on the switch sockets.
4. Replace the cover and secure with the screws.
5. Place the 4-piece set of mouse feet on their designated places.
IMPORTANT! The mouse feet areas differ in shapes and sizes. Ensure to place the correct mouse
foot to the mouse foot area of the same shape and size.
ROG Gladius Gaming Mouse
Q9918_AK47_Gaming_Mouse_QSG_V2.indd 5
Switch socket
5
11/13/2014 4:20:01 PM