Iso-Tech ICM35N Bedienungsanleitung Seite 4

#
This symbol indicates where cautionary or other information is found in the manual.
Battery
1-3 Front Panel
Refer to Figure 1 and the following numbered steps to familiarise yourself with the meter's front panel controls and
connectors.
1. Digital Display — The digital display has a 3 3/4 digit LCD readout (maximum reading 3999) plus decimal point,
, AC% and unit annunciators.
2. Input Terminal — The black test lead must always be connected to the "COM" input jack and red test lead must
è
always be connected to the "V- " input jack when measuring ACV and OHMS.
3. Drop-Proof Wrist Strip — Prevents the instrument from slipping off the hand while in use.
è
4. Function Switch — Slide switch is used to select V%, A%, or function.
5. Data Hold Switch — Hold display reading for all functions and ranges.
6. Trigger — Press the lever to open the transformer jaws. When the pressure on the lever is released, the jaws will
close again.
7. Current transformer Jaws — Designed to pick up the AC current flowing through the conductor.
8. Hand Guard — Designed to prevent the users hand slipping onto the measuring conductor.
4