Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - Parkside PAAS A2 Bedienungs- Und Sicherheitshinweise

Akku-arbeitsleuchte
Vorschau ausblenden Andere Handbücher für PAAS A2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Safety instructions

BEFORE USING THE PRODUCT, FAMILIARISE
YOURSELF WITH ALL OF THE SAFETY
INFORMATION AND INSTRUCTIONS FOR USE!
WHEN PASSING THIS PRODUCT ON TO OTHERS,
ALSO INCLUDE ALL THE DOCUMENTS!
WARNING!
AND RISK OF ACCIDENTS FOR
INFANTS AND CHILDREN!
Never leave children unsupervised with the packaging
material . Always keep children away from the
packaging material .
This product may be used by children aged
 
8 years and up, as well as by persons with
reduced physical, sensory or mental capacities,
or those lacking experience and / or knowledge
provided they are supervised or instructed in the
safe use of the product and they understand the
associated risks . Do not allow children to play with
the product . Cleaning and user maintenance must
not be performed by children without supervision .
This product is not a toy and should be kept out
 
of the reach of children . Children are not aware
of the dangers associated with handling electrical
products .
Do not use the product if you detect any type of
 
damage .
Never immerse the product in water or other
 
liquids!
Only connect the product to a properly installed
 
mains socket or a suitable 12 V car charging
socket . The voltages in each case must comply
with information given in the section "Technical
data" .
Ensure that the electrical socket is easily accessible
 
so that you can pull the power adaptor  10 quickly
out of the socket if necessary .
DANGER TO LIFE
Do not carry out any modifications or repairs to
 
the product yourself . The LEDs cannot and must
not be replaced .
The LEDs are not replaceable .
 
If the LEDs fail at the end of their lifes, the entire
 
product must be replaced .
m CAUTION! DANGER OF BURN INJURIES!
To prevent burns, verify the product is switched
off and has cooled down for at least 15 minutes
before touching it . The product can become very
hot .
The accessible surface, especially heat shrink, is
 
very hot when the lamp is operating .
FIRE HAZARD! Fit the product so that
 
it is at least 1 metre away from the
material to be illuminated . Excessive
heat can result in a fire .
WARNING!
 
the product is facing down to a combustible
surface . The exposed surface may be overheated
or ignited .
Do not place burning candles or open fire on or
 
near the product .
Do not use the product near heat sources such as
 
radiators or devices emitting heat .
Dispose of the product if product, power
 
adaptor  10 , car charger adaptor  11 or USB
cable  12 are damaged .
Ensure the USB cable  12 cannot become
 
damaged by sharp edges or hot objects . Unwind
the USB cable  12 completely before use .
This product may only be charged with the power
 
adaptor  10 or car charger adaptor  11 provided .
While power adaptor  10 or car charger
 
adaptor  11 are plugged in, they use a small
amount of power, even when the product is not
switched on .
To take power adaptor  10 or car charger
 
adaptor  11 out of operation, unplug power
adaptor from the socket or remove car charger
adaptor  11 from the 12 V supply respectively .
Do not turn on the light when
GB/IE
17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis