CLEARING THE MEMORY
Press A and B-fig. 1 buttons simul-
taneously for at least 2 seconds for
clearing the system memory.
IMPORTANT Clearing the memo-
ry will disconnect all stored phones, will
clear any phone number stored in the
system memory and will require to re-
peat the pairing phase.
If 2 mobile phones at least are paired,
the first phone paired (in chronologi-
cal order) will have highest priority.
This means that when getting into the
vehicle with system active (key at
MAR), this will be the first phone to
be searched and, if present, to be con-
nected. Should the priority phone not
be found, the system will then search
for the other phones.
Find below a description of the main
communication procedures valid for
almost all mobile phones.
Making a call manually:
– dial the number on the mobile
– press directly the phone button to
start the call;
– the call will be switched automati-
cally to hands-free mode (on certain
phone models, button B-fig. 1 must
be pressed to shift the telephone call
to hands-free mode).
Making a call using the voice
recognition (after assigning a
voice tag to a phonebook
– press button B-fig. 1;
– wait for sound signal to be heard
and/or "PHONE" writing to appear on
sound system display;
– pronounce the name of the person
you wish to call;
– the system will repeat the name for
confirmation and then will start the
– if the name pronounced by the sys-
tem is not the required one, press but-
ton A-fig. 1 and repeat the proce-
Call through voice recognition is pos-
sible only if voice tags have been as-
signed to phonebook entries.