Epson ELPMB29 Bedienungsanleitung Seite 14

g
Tighten the adjuster bolts fixed temporarily in step
Tighten the three adjuster bolts with equal force.
Warning
Tighten all screws firmly. Otherwise, the projector or this product may fall and cause personal injury or an
accident.
 When you have completed the projector installation, connect the necessary cables. Use the
cutout on the base frame unit so that the cables do not stick out.
 For adjusting the image and more details on the projector, refer to the User's Guide supplied
with the projector.
 Make sure the table does not wobble after you have installed the projector.
14
c