Troubleshooting - Parkside PDAP 75 A1 Originalbetriebsanleitung

Troubleshooting

Fault
Speed too slow,
air escapes from
the outlet.
Appliance
does not move;
compressed air es-
capes completely
through the outlet.
PDAP 75 A1
Possible cause
Motor parts jam-
ming due to dirt.
Pressure supply too
low.
Motor is jammed
due to material
build-up.
Remedy
Check the pressure
supply filter for contam-
ination.
Check the pressure
supply filter for contam-
ination.
Lubricate the appliance
as described in the
instructions.
If necessary, repeat the
steps outlined above.
Lubricate the appliance
as described in the
instructions.
GB │ IE │ NI │
19 ■