Using The Auxiliary Handle; Maintenance And Cleaning; Service; Warranty - Parkside PWS 125 A1 Originalbetriebsanleitung

Use of accessories / Maintenance and cleaning / Service / Warranty
12
5
DANGER OF INjURy! Always use the an-
gle grinder with the disc guard cover
place. The disc guard cover must be securely
attached to the angle grinder. To ensure the
highest level of safety while using the device,
ensure that the smallest possible area of the
grinding or cutting tool is exposed to the oper-
ator at all times (see Fig. C, D). The disc guard
cover is there to protect the operator from
5
pieces breaking off and accidental contact
with the grinding or cutting tool. The disc guard
cover has 5 set positions.
T urn the disc guard cover
position (working position).
The closed side of the disc guard cover
always be facing the operator.

Using the auxiliary handle

Q
CAUTION! For safety reasons this device must
always be used with the auxiliary handle
The auxiliary handle
4
left, right or on the top of the head of the device.

Maintenance and cleaning

Q
Pull the mains plug out of the mains socket
before you carry out any task on the device.
D o not use sharp objects for cleaning
the device. Do not allow any liquids
to enter the device. Otherwise the tool may
be damaged.
H ave the carbon brushes replaced only at the
service centre or an accredited electrical
equipment repair centre. The device requires
no other maintenance.
in
5
into the desired
5
must
5
in place.
4
can be screwed on to the
DANGER OF INjURy!
C lean the device frequently; for best results do
this immediately after you have finished using it.
U se a dry cloth to clean the housing – under
no circumstances use petrol, solvents or clean-
ing agents that attack plastic.
A vacuum cleaner is required to thoroughly
clean the device.
V entilation openings must always be kept free.
R emove any adhering dust with a narrow paint
brush.

Service

Q
Have your device repaired
at the service centre or by qualified
specialist personnel using original
manufacturer parts only. This will ensure
that your device remains safe to use.
If the plug or lead needs
to be replaced, always have the re-
placement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.

Warranty

Q
The warranty for this appliance is for 3 years
from the date of purchase. The appliance
has been manufactured with care and me-
ticulously examined before delivery. Please
retain your receipt as proof of purchase. In
the event of a warranty claim, please make
contact by telephone with our Service
Department. Only in this way can a post-
free despatch for your goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile components,
e.g. buttons or batteries. This product is for private use
only and is not intended for commercial use.
The warranty is void in the case of abusive and
improper handling, use of force and internal tam-
pering not carried out by our authorized service
GB 17