Connecting The Saw Dust Extraction; Replacing The Saw Blade; Maintenance And Cleaning; Service - Parkside PTS 480 A1 Originalbetriebsanleitung

Start-up / Maintenance and Cleaning / Service / Warranty
Connecting the saw
dust extraction
Push the extraction air hose
nection for dust extraction
Connect a vacuum device approved for the
extraction of sawdust and splinters to the dust
extraction hose
19

Replacing the saw blade

1. Operate the spindle lock
clamping screw
18
turn clockwise). Now lift off the clamping screw
and washer and the clamping flange
18
(see also Fig.D).
2. Adjust cutting depth to the maximum position.
3. Swing the base plate
4. Take off the saw blade.
5. Refitting of the saw blade is the reversal of the
removal.
6. Operate the spindle lock
place) and, using the Allen key, tighten the
clamping screw
18
The arrow on the saw blade must coincide with
the arrow for the direction of rotation
(marked on the appliance).

Maintenance and Cleaning

DANGER OF INJURY! Re-
move the mains plug from the mains socket before
you carry out any work on the appliance.
Clean the appliance after finishing work.
To clean the appliance, use a cloth and do not
use petrol, solvents or cleaning fluids.

Service

repaired by qualified specialist per-
sonnel using OEM parts only. This ensures
that the safety of the device is maintained.
lead needs to be replaced, always
12 GB/IE
onto the con-
19
.
14
.
and loosen the
13
with the Allen key (to open
17
upwards.
9
(until it clicks into
13
.
Have your appliance
If the plug or mains
have the replacement carried out by
the manufacturer or its service centre.
This ensures that the safety of the device is
maintained.

Warranty

The warranty for this appliance is for
3 years from the date of purchase. The
device has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a free post despatch for your
goods be assured.
The warranty covers only claims for material and
manufacturing defects, but not for transport dam-
age, for wearing parts or for damage to fragile
components, e.g. buttons or batteries. This product
is intended for private, non-commercial use only.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
This warranty does not limit your legal rights.
The warranty period will not be extended by repairs
made under warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the device, at the latest, two days after
the purchase date. Repairs made after the expira-
tion of the warranty period are subject to a charge.
GB
Service Great Britain
Tel.: 0871 5000 720
(0,10 GBP/Min.)
e-mail: kompernass@lidl.co.uk
IAN 79416