Yamaha YDRE Serie Benutzer-/Betriebsanleitung Seite 46

5
JC1
MAINTENANCE
Transaxle Oil
To check transaxle oil level:
1. Place the PTV on a flat, level
surface.
2. Remove seven plastic rivets 1
and two bolts 2, and remove
the bag holder insert 3.
3. Place an oil pan under the
transaxle case.
Y-1994
4. Clean the area around the oil
level plug 4 and then remove
the plug.
NOTICE
Do not allow foreign material to
enter transaxle. Serious transaxle
damage can result.
4
5. The oil level should be right at
the bottom of the oil level plug
Y-2278
hole 5 or just starting to flow
out of the hole.
6. If needed, add SAE 90 gear oil
until it starts to flow from the oil
level plug hole.
7. Allow excess gear oil to flow out
of the hole until it stops.
8. Install the oil level plug.
9. Install the bag holder insert 3
and secure with two bolts 2
and seven plastic rivets 1.
TIP
For transaxle oil replacement,
consult a Yamaha dealer or other
qualified mechanic.
Y-1994
1
2
3
4
5
6
7
8
9
10
11
7-18