GB
IE
•
Do not operate the pressure washer
when other people are in the immedi-
ate vicinity, other than they are also
wearing protective clothes.
•
Do not start the high-pressure wash un-
til the patio cleaner rests on the surface
you are cleaning.
•
Take appropriate measures to keep chil-
dren away from the equipment whilst it
is running.
•
Dispose of the packaging material cor-
rectly.
•
Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
•
Store the equipment in a dry place and
out of reach of children.
•
Children should be supervised to en-
sure that they do not play with the ap-
pliance.
. Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
•
Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the ap-
proval of the manufacturer.
•
Protect the patio cleaner from frost
•
Use only original accessories and do
not carry out conversion work on the
equipment.
Fitting
•
Screw the connection pipe (2) into the
pivoting connector (3).
•
To extend your reach, snap on and
turn the bayonet mount of the pipe ex-
tension (1) to the connection pipe (2).
6
•
To connect to the pressure washer,
snap the bayonet mount into the pres-
sure washer's jet gun.
Start-up
Take heed of the backstroke gen-
erated by the jet of water. Stand
firmly and hold the jet gun tightly.
You may otherwise injure yourself
or others.
•
Do not release water from the pressure
washer until the patio cleaner rests on
the surface you are cleaning.
•
Always hold the patio cleaner by the
handle (5) when washing down walls.
•
Avoid the patio cleaner going over
free corners.
•
The patio cleaner is not designed for
scouring out or scrubbing.
Cleaning and
Maintenance
Cleaning
Always.keep.the.washer.clean..Do.
not.use.any.detergents.or.solvents.
•
Only clean the pressure washer with a
soft brush or a slightly moist cloth.
Maintenance
The patio cleaner is maintenance-free.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.