Locating Concealed Objects - Parkside IAN 319468 Bedienungs- Und Sicherheitshinweise

result is shown in the lower row
of the display
8. Repeat steps 2 to 7 to add further
measurements.
9. Press the MODE button
the addition mode. All the measure-
ments will be cleared.
Locating concealed
objects
Hints: Before using the product for this
task, first test it by locating a metal pipe-
line or electrical power cable at a known
position.
In cases of doubt, always ask a qualified
building contractor.
Attention!
Should the product find a live wire
carrying alternating current, ( ) high
voltage warning symbol
in the display
should you drill at this location! Danger
of electric shock!
.
2
19
. Under no circumstances
2
21
to leave
4
will appear
GB/IE 77