Canon imagePRESS C910 Kurzanleitung Seite 9

12
Reset key
Press to restore the standard settings of the
machine.
13
ID (Log In/Out) key
Press to log in/out when a login service such as
Department ID Management or SSO-H has been
set.
14
Touch Panel Display
The settings screen for each function is shown on
this display.
15
Brightness Adjustment Dial
Use to adjust the brightness of the touch panel
display.
16
Volume Settings key
Press to display the screen to specify the audible
tones for the fax function.
Setting the Energy Saver mode/Sleep mode to minimize energy consumption
You can save energy consumption by using the Energy Saver mode/Sleep mode when the machine is not
being used for a prolonged period of time, such as a lunch time. To use these modes, simply press
the control panel. If the machine is idle for a certain period of time, the machine will enter the Sleep mode
(Auto Sleep mode). For more information on the mode which activates after
information on the Auto Sleep mode, see the User's Guide.
"Basic Operations" > "Energy Saving Features" in the User's Guide
17
Status Monitor/Cancel key
Press to check the status of jobs or to cancel print
jobs. Also, press to check status of the machine,
such as checking the amount of paper remaining.
18
Quick Menu key
Press to retrieve favorite functions stored in Quick
Menu. Also, if you are using authentication, Quick
Menu set for each individual user can be displayed.
19
Main Menu key
Press to return to the Main Menu screen, such as
when you want to switch functions.
is pressed, and detailed
Parts and Their Functions
on
9