Transmitter During The Dive; Bar / Psi - Seac GURU HP Gebrauchsanweisung

TRANSMITTER DURING THE DIVE

BAR / Psi

The lower right part of the GURU screen will display the BAR value (PSI if Imperial units of measure are set). The BAR value
indicates the pressure remaining in the tank.
The BAR value will be displayed about 30 seconds after the Transmitter is switched on. The BAR value is updated every 5 seconds.
If data transmission is interrupted, or is unstable for more than 1 minute, the BAR value will be hidden ("---"). The BAR value will be
restored as soon as communications are stable again for at least 1 minute.
12 English
0.0
OC
0
:00
MIX RBT BAR
21 ---
---