Herunterladen Inhalt Inhalt Diese Seite drucken

Residual Risks - Parkside PSBS 240 B2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PSBS 240 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 65
GB
MT
saw chain. In the event that it is dam-
aged or severed, immediately discon-
nect the plug from the socket.
Do not touch the cable before it has
been disconnected from the mains.
Risk of electric shock.
The replacement of the plug and cable
must always be carried out by the
manufacturer of the electric tool or his/
her customer service in order to avoid
any hazards.
Only switch the device on once it is
safely fixed to the worktop.
For your own safety only use accessories
and attachments which were stated in
the operating instructions or recommend-
ed or specified by the tool manufacturer.
Only use grinding tools recommended
by the manufacturer. Do not use any
saw blades. Ensure that the dimensions
match those of the device.
Only use grinding discs where the
printed rotational speed is at least as
high as what has been specified on
the name plate of the device.
Carry out a visual inspection of the
grinding disc before use. Do not use
any damaged or deformed grinding
discs. Replace any damaged or worn
grinding discs.
Never operate the device without spark
protection or protective hoods. Periodi-
cally readjust the spark protection in
order to offset the wear and tear of the
grinding disc (distance max. 2 mm).
Replace the grinding disc if the spark
protection and the workpiece support
can no longer be readjusted to a dis-
tance of max. 2 mm at the latest.
Make sure that the sparks produced
by grinding do not present a danger,
e.g. reach people or ignite flammable
substances.
56
Always wear safety goggles, safety
gloves, respiratory protection and ear
protection when grinding, brushing and
separating.
Never keep the fingers between the
grinding disc and spark protection or in
close proximity to the protective hoods.
There is a risk of crushing.
The rotating parts of the device cannot
be covered due to functional reasons.
Therefore, proceed cautiously and hold
the workpiece firmly in order to avoid
slipping which could cause your hands
to come into contact with the grinding
belt or grinding disc.
The workpiece gets hot during grinding.
Do not touch the machined area, allow
it to cool down. There is a risk of burn-
ing. Do not use coolants or the like.
If you are tired or have consumed al-
cohol or tablets, do not work with the
device. Always have a break on time.
Switch the device off and remove the
mains plug
- to loosen a blocked insertion tool,
- if the connection line is damaged or
entangled,
- in case of unusual sounds.

Residual risks

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a) Lung damage, if suitable respiratory
protection is not worn.
b) Hearing damage, if suitable ear protec-
tion is not worn.
c) Damages to health due to
- touching the area of the grinding tool
which was not covered;
- the ejection of pieces from workpiece
or damaged grinding discs.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Psbs 240 c2

Inhaltsverzeichnis