Safety Instructions; Symbols And Icons; Symbols On The Device - Parkside PSBS 240 B2 Originalbetriebsanleitung

Grinding disc
Outer diameter ................... Ø 150 mm
Bore hole .......................... Ø 12.7 mm
Thickness .................................20 mm
Granulation ....................................36
Velocity v ........................max. 23 m/s
0
Grinding belt
Dimension ...................... 50 x 686 mm
Granulation .............................80/120
Velocity v ................................15 m/s
0
Weight (incl. accessories) .. approx.
Sound pressure level
(L ) .......................89 dB(A); K
pA
Sound power level (L
measured ............ 102 dB(A); K
Vibration total value (a
* A break is introduced after 30 minutes of
uninterrupted operating duration until the
device temperature differs 2 K (2° C) less
than room temperature.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
Warning! The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
7.1 kg
=3 dB
pA
)
WA
=3 dB
WA
) ........ 2,5 m/s
h
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched off
and times when it is switched on but
running without any load).

Safety Instructions

WARNING! When using power
tools, observe the following basic
safety measures for the prevention
of electric shocks and the risk of in-
jury and fi re. Please read all these
instructions before using the electric
2
tools and please keep the safety
instructions.

Symbols and icons

Symbols on the device:

Warning!
Risk of injury from the rotating tool!
Keep hands away.
Risk of electric shock! Disconnect
from the mains before carrying out
maintenance and repair work.
Read the instruction manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Risk of cuts.
Wear cut-resistant gloves.
GB MT
53