Herunterladen Inhalt Inhalt Diese Seite drucken

Trouble Shooting; Corrective Action - Parkside PLS 3000 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PLS 3000 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Trouble shooting

Problem
Possible cause
No mains power supply
Worn out carbon brushes
Appliance
Motor faulty
won't start
On/Off switch (
The suction tubes (
ection bag (
tubes (
(
Internal loose contact
Intermittent
Power cable damaged
operation
On/Off switch (
Collection bag (
Weak or
no suction
Collection bag (
power/
Impeller, blower or suction pipe
throughput
(
Impeller does
Foreign body blocking the impel-
ler
not move
4) defective
16) and coll-
14), and/or blower
9) and protective cover
7) are not correctly mounted.
4) defective
14) is full
14) is dirty
9/16) is clogged or blocked
GB

Corrective action

Check the socket, cable, line, plug and
fuse and have them repaired by a qua-
lified electrician if necessary.
Send in to Service Centre for repair
See the section on „Initial start-up"
Send in to Service Centre for repair
Empty collection bag
Clean collection bag
see „Removal of clogging
and blockage"
Remove the blockage (see „Removal
of clogging and blockage")
IE
NI
CY
19

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis