Proper Use; Features And Equipment; Included Items; Technical Information - Parkside PMGS 12 C3 Bedienungs- Und Sicherheitshinweise

Introduction
Modelling & engraving set
PMGS 12 C3
Introduction
Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Proper use

Q
The small drill is to be used for drilling, milling, en-
graving, polishing, cleaning up, grinding, separating
and sawing of wood, metal, plastic, ceramic or stone
in dry rooms. Any other use or modification to the
drill / grinder shall be considered as improper use
and could give rise to considerable dangers. The
manufacturer will not accept liability for loss or
damage arising from improper use. Not intended
for commercial use.

Features and equipment

Q
Modelling & engraving set:
oN / oFF switch / speed control
1
Plug for power supply
2
Metal bracket
3
Grip collar
4
Clamping nut
5
Grip collar with LED light
6
Spindle lock
7
Mains adapter (see Fig. A):
Plug-in device for plug
8
Tray
9
Mains adapter
10
Power cable (with mains plug)
11
48 GB/MT
2
Accessories (see Fig. B):
6 HSS drills
12
2 Mandrels for mounting tools
13
3 Polishing wheels
14
4 Grinding wheels
15
1 Metal brush
16
16 Cutting wheels
17
5 Collets
18
2 Plastic brushes
19
3 Milling bits
20
2 Engraving bits
21
5 Grinding bits
22
1 Combination tool
23
LED light oN / oFF switch
24

Included items

Q
1 Modelling & engraving set
1 Mains adapter
1 Plastic case
1 Accessory kit (50-piece)
1 Handle ring incl. batteries
1 operating instructions

Technical information

Q
Modelling & engraving set PMGS 12 C3:
Nominal voltage: 12 V
Nominal input
power: 22 W
Idle-running speed: n 5000–20000 min
Drill bit
diameter : max. ø 3.2 mm
Disc: max. ø 25 mm
Certified acc. to: EN60745-1:2009/A11:2010,
EN60745-2-1:2010,
EN60745-2-23:2013
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 57.3 dB(A)
Sound power level: 68.3 dB(A)
Uncertainty K: 3 dB
-1