Introduction; Intended Use; Features And Fittings; Included Items - Parkside PDT 40 C2 Bedienungs- Und Sicherheitshinweise

Introduction

Pneumatic stapler PDT 40 C2
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
operating instructions are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, famil-
iarise yourself with all of the operating instructions
and safety instructions. Use the product only as de-
scribed and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.

Intended use

The device is suitable for assembly and repair work.
Any other use or modification to the device shall be
considered as improper use and could give rise to
considerable dangers. We will not accept liability
for loss or damage arising from improper use. The
device is intended for private domestic use only.

Features and fittings

Exhaust air aperture (can be rotated)
1
Trigger
2
Handle
3
Threaded nipple 6.35 mm (¼")
4
Magazine
5
Fill level indicator
6
Knurled screw
7
Trigger lock
8
Mouth
9
Face plate
10
Face plate quick clamp lever
11
Magazine lever
12

Included items

1 Pneumatic stapler PDT 40 C2
1 Carrying case
1 Special compressed air oil
22 GB/MT
1 Threaded nipple 6.35 mm (¼") (pre-assembled)
1 Package nails, 1000 pcs.
1 Package staples, 1000 pcs.
1 Protective glasses
1 Operating instructions

Technical data

Dimensions:
Weight
(without fasteners):
Trigger type:
Maximum permissible
pressure:
Recommended pressure
range:
Air consumption per
drive in process:
Recommended lubricant: Compressed air special oil
Loading capacity:
Nail lengths:
Staple lengths:
Staple width:
Recommended
Hose diameter:
Compressed air quality: Cleaned, oil-misted
Noise and vibration data:
Measured values for noise are determined in ac-
cordance with EN 12549:1999, EN ISO 4871.
The A-weighted sound pressure level of the device
is typically 114.3 dB(A). The sound power level of
the device is 125.6 dB(A). Uncertainty K = 2.5 dB.
These values are characteristic values referenced to
the device and do not reflect noise development at
the work location. Noise development at the work
location depends e.g. on the work environment, the
workpiece, the workpiece support and the number
of fastener driving processes.
240 x 57 x 235 mm
(L x H x W)
1.255 kg
Compressed air
8 bar
4 to 7 bar
approx. 0.09 litre per
driving-in process
100 pcs.
15 mm, 20 mm
25 mm, 30 mm,
32 mm, 35 mm,
38 mm, 40 mm,
45 mm, 50 mm,
10–40 mm
5.7 mm
∅ 9 mm
and condensate-free