Grundig GDS 2460 B Bedienungsanleitung Seite 12

Installing your appliance
Information required for the prepa-
ration of the installation place for
your hood is given below.
3.2 Installing the hood onto the
wall
To install the hood onto the wall,
loosen the screws of hanger plates
on the motor housing and pull
the plates upwards. Then, tighten
the screws of the hanger plates.
(Figure 3a).
(Figure 3a)
External flue connection
(Figure 3b)
12
Hanger plate
plate
If you will use Ø 120 mm flue pipe,
install Ø 120 mm flue adapter onto
it.