Blaupunkt FKS501 Bedienungsanleitung Seite 4

FKS501
Device is compliant with EU directives:
- Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
Your products is designed a manufactured with high quality materials and components,
which can be recycled and reused.
Technical data:
Capacity up to 5kg, graduation 1g
Power supply: 2 x 1.5V LR03 batteries (AAA)
1. Display
1a. Tare function active
1b. Scale reset
1c. Negative value
REPLACING THE BATTERIES
1. Open the battery cover on the bottom of the device. Remove the used battery.
2. Insert a new battery paying attention to the proper polarity.
CHANGING THE UNITS, OPERATION MODE
To change units from metric (kg) to imperial (lb, st) or vice versa, press and hold the UNIT button for
approx. 3 seconds.
To change the operating mode: weight/water volume/milk volume, short press the UNIT button.
PRODUCT WEIGHT MEASUREMENT
Start the scale by pressing the
will show the measurement result.
TARE FUNCTION
Start the scale by pressing the
button again to reset the scale.
ERROR MESSAGES
Err – The scale has been overloaded.
Lo – Low battery, replace the batteries.
If an error is displayed and the scale does not turn off automatically after a longer time, remove the
batteries for more than 5 seconds.
CLEANING AND MAINTENANCE
Wipe the weighing platform with a damp cloth. Then wipe dry. Do not submerge in water or other
liquids.
1d. Operating mode (weight, water / milk volume)
1e. Weight / volume units
2. Scale platform
3. Bowl
button. Place the bowl with the product on the . The display
button. Put an empty vessel on the scale. Press the
2