Yamaha WaveRunner XLT800 Zusammenbauanleitung Seite 30

EXPLODED DIAGRAM
Step Procedure/Part name
4 Throttle cable
Q'ty
1
Installation steps:
Install the throttle cable end into the
G
throttle lever.
G Fit the seal into the groove in the
bracket.
Turn the adjuster 1 in/out until the
G
specified free play is obtained.
Throttle lever free play e:
4–7 mm (0.16–0.28 in)
Turn in
Turn out
G Tighten the locknut 2.
– 8 –
Service points
Free play is increased.
Free play is decreased.
E