Adjust Paint Jet; Regulating The Paint Volume; Regulating The Air Quantity; Maintenance And Cleaning - Parkside PABK 60 B3 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Switching on:
To turn on, press the trigger lever
it pressed down.
Switching off:
To end operation, release the trigger lever

Adjust paint jet

The device has two settings: round and broad jet.
Round jet
Adjusting the round jet:
The round jet is suitable for areas such as small
surfaces, corners and edges.
Turn the regulator
15
Adjusting the broad jet:
The broad jet is suitable for larger surfaces, both
vertical and horizontal.
Turn the regulator
direction .
The nozzle head can be continuously adjusted
to the correct position vertically and horizontally
by being turned towards the desired position.

Regulating the paint volume

NOTE
The front locking screw serves to restrict the adjust-
ment range of the material amount regulation
screw .
14
Increasing the quantity of paint:
Turn the material amount regulation screw
in an anticlockwise direction.
Reducing the quantity of paint:
Turn the material amount regulation screw
in a clockwise direction.
285126_Airbrush-Set PABK 60 B3_content_IE.indd 15
Mini spray gun initial use / Maintenance and Cleaning
and hold
18
18
Broad jet
in a clockwise direction.
in an anticlockwise
15
14
14

Regulating the air quantity

NOTE
We recommend you begin with the maximum
air quantity. To do this, open the air volume
. regulator to the maximum as is described
below under "Increasing air quantity".
Increasing the air quantity:
NOTE
We recommend you increase the air quantity if
the spray field is too course.
Turn the air quantity regulator
wise direction.
Reducing the air quantity:
NOTE
We recommend you decrease the air quantity
if the paint mist is too strong.
Turn the air quantity regulator
wise direction.

Maintenance and Cleaning

DANGER OF INJURY!
Before maintenance works, separate the device
from the pneumatic network.
NOTE
Thorough cleaning after every operation is
very important for safety and use. Otherwise
for example the needle becomes clogged and
the device's functioning is no longer guaranteed.
Wear suitable protective gloves when carrying
out cleaning work.
Do not use any hydrocarbon-containing
halogen solvents, such as trichloromethyl, ethyl
chloride, etc., as they undergo chemical reac-
tions with some materials of the paint spray
gun. This can lead to dangerous reactions.
in a clock-
17
in a clock-
17
GB/IE/NI 15
14.06.17 16:34