Introduction; Device Description; Intended Use; Technical Data - Parkside PGI 1200 A1 Bedienungs- Und Sicherheitshinweise

1. Introduction

We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They con-
tain important information concerning safety, use and
disposal. Before using the product, please familiarise
yourself with all of the safety information and instruc-
tions for use. Only use the unit as described and for
the specified applications. If you pass the product on
to anyone else, please ensure that you also pass on
all the documentation with it.
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety information with due care.
We cannot accept any liability for damage or acci-
dents which arise due to a failure to follow these in-
structions and the safety information.
2. Device description (Fig. 1/7)
1. Handle
2. Fuel tank cap
3. Foot
4. Operating bulb
5. Oil check bulb
6. On/off switch
7. Earthing screw
8. 230 V~ socket
9. Choke lever
10. Starter grip
11. Air filter lid
12. Air filter
13. Oil filler plug
14. Low oil trip
15. Spark plug cap
16. Spark plug
17. Fuel tap
18. Fuel filter
A. Oil filler bottle
B. Handle
C. Screwdriver
D. Spark plug spanner
E. Socket wrench
F. Tool bag

3. Intended use

The generator is suitable for devices which use a 230
AC voltage source.
Please check the suitability for use of house hold de-
vices on the manufacturer information.
The machine may only be utilised for its intended use.
Any other use is not intended. The user / operator,
not the manufacturer, is liable for resulting damages
or any type of injury resulting from any other use that
is not intended.
Please ensure that this device was not intended for
commercial use. We do not accept any warranty li-
ability if the device is used for commercial, manual,
or industrial operations, or activities similar to these.

4. Technical Data

Generator
Protection type
Continuous Power P (S1)
rated
Power P (S2/5 min)
max
Power P (S2/5 s)
peak
Nominal voltage U
rated
Rated current I
rated
Frequency F
rated
Type drive motor
Engine displacement
Max. power (motor)
Fuel
Tank capacity
Engine oil
Use at 2/3 engine load
Weight
Sound pressure level L (1 m)
pA
Sound power level L
WA
Uncertainty K
Power factor cos ϕ
Performance class
Quality class
Spark plug
Operating mode S1 (long use)
The machine can be used continuously with the indi-
cated power.
Operating mode S2 (Short term use)
The machine can be used in the short term with the
indicated power.
Acceptable ambient temperature:
-10 to +40 °C
Height: 1000 m above NN
rel. air humidity: 90 % (not condensed)
Inverter
IP23M
1000 W
1100 W
1200 W
230 V~
4,35 A
50 Hz
4 stroke air-cooled
54 cm³
2,1 kW/2,85 PS
Unleaded fuel
This device may
not be operated
with E10 petrol
4,2 l
0,25 l
(15W-40)
approx.0,88 l/h
12,8 kg
74,39 dB (A)
95 dB(A)
1,07 dB (A)
1
G1
B
MS A7RTC
3
GB