Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Warnings; General Power Tool Safety Warnings - Parkside PFMR 1600 A1 Bedienungs- Und Sicherheitshinweise

Farb- und mörtelrührer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 70

Safety warnings

˜ General power tool safety
warnings
m
WARNING!
Read all safety warnings and
u
all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and / or serious injury .
Save all warnings and instructions
u
for future reference. The term "power
tool" in the warnings refers to your mains-
operated (corded) power tool or battery-
operated (cordless) power tool .
Work area safety
1 . Keep work area clean and well lit.
Cluttered or dark areas invite accidents .
2 . Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes .
3 . Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose control .
8
GB
Electrical safety
1 . Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock .
2 . Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded .
3 . Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock .
4 . Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving
parts . Damaged or entangled cords increase
the risk of electric shock .
5 . When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of
electric shock .
6 . If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD reduces
the risk of electric shock .

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis