Changing The Engraving Tips - Parkside PGG 15 E4 Originalbetriebsanleitung

Changing the engraving tips

CAUTION! RISK OF INJURY!
► Switch the appliance off and remove the power plug before
commencing any work to the appliance .
♦ Change the engraving tip
and no longer delivers the desired engraving results . Turn the
engraving tip lock
can be removed .
♦ Remove the spring and washer .
♦ Slide the washer and spring onto a new engraving tip
insert it into the appliance and turn the engraving tip lock
clockwise to lock the tip .
♦ Ensure that the engraving tip
■ 10 │ GB │ IE │ NI │ CY
as soon as it becomes worn
anticlockwise until the engraving tip
is fixed correctly in place .
. Then
PGG 15 E4