5 . Service
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained .
Operation
Never use the appliance for other purposes and only original parts/
accessories . Using attachments or accessory tools other than those
recommended in the operating instructions can lead to a risk of injury .
Switching on and off
♦
Insert the power plug into a mains wall socket .
Switching on:
♦
Press the ON/OFF switch
Switching off:
♦
Let go of the ON/OFF switch
Setting the stroke depth
You can use the stroke rate control
engraving . A low setting is usually sufficient for the most common
applications .
♦
Turn the stroke rate control
stroke depth .
♦
Turn the stroke rate control
stroke depth .
NOTE
►
When you increase the stroke depth, make sure not to turn the
stroke rate control
Otherwise, you will unscrew the control off the appliance .
PGG 15 E4
.
.
to adjust the depth of the
towards the + to increase the
towards the – to decrease the
too far in the direction of the + .
GB │ IE │ NI │ CY
│
9
■