Starting System; Wiring Connections - Yamaha Waverunner XLT1200 Wartungshandbuch

– +
ELEC

STARTING SYSTEM

BATTERY
Refer to "ELECTRICAL" in Chapter 3.

WIRING CONNECTIONS

1. Check:
Wiring connections
Poor connections → Properly connect.
FUSE
1. Check:
Fuse holder continuity
No continuity → Check the fuse or
replace the fuse holder.
Fuse holder continuity:
Between 1 and 2
Between 2 and 3
2. Check:
Fuse broken
Broken → Replace.
Fuse rating:
10A, 20A
NOTE:
20A fuse is for CDI unit and rectifier/regula-
tor.
10A fuse is for multifunction meter, YPVS
motor and start switch.
7-20
E