Inhaltsverzeichnis
Werbung
JET
PUMP
BEARING HOUSING
1
SERVICE POINTS
Driven coupling removal and installation
1. Remove and install:
Driven coupling
Coupler wrench:
YW-06551/90890-06551
Shaft holder:
YB-06552/90890-06552
NOTE:
Install the driven coupling with the same
special tools that were used for removal.
Intermediate drive shaft removal
1. Remove:
Intermediate drive shaft
Removal steps:
Temporarily install the driven coupling
to the intermediate drive shaft.
Insert the long rod to the driven cou-
pling shaft.
Press out the intermediate drive shaft
by pushing the rod.
NOTE:
Support the intermediate housing with
steel blocks 1 and press the driven cou-
pling shaft.
Bearing removal
1. Remove:
Bearing
Driver rod:
YB-06071/90890-06606
Bearing outer race attachment:
YB-06156/90890-06626
NOTE:
Install the bearing with the same special
tools that were used for removal.
Support the intermediate housing with
steel blocks 1 and press the bearing.
6-23
E
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
